Struct TupleIndex
pub struct TupleIndex(/* private fields */);Implementations§
§impl TupleIndex
impl TupleIndex
pub const EMBEDDED_PEAK_TUPLE: u16 = 32_768u16
pub const EMBEDDED_PEAK_TUPLE: u16 = 32_768u16
Flag indicating that this tuple variation header includes an embedded peak tuple record, immediately after the tupleIndex field.
If set, the low 12 bits of the tupleIndex value are ignored.
Note that this must always be set within the ‘cvar’ table.
pub const INTERMEDIATE_REGION: u16 = 16_384u16
pub const INTERMEDIATE_REGION: u16 = 16_384u16
Flag indicating that this tuple variation table applies to an intermediate region within the variation space.
If set, the header includes the two intermediate-region, start and end tuple records, immediately after the peak tuple record (if present).
pub const PRIVATE_POINT_NUMBERS: u16 = 8_192u16
pub const PRIVATE_POINT_NUMBERS: u16 = 8_192u16
Flag indicating that the serialized data for this tuple variation table includes packed “point” number data.
If set, this tuple variation table uses that number data; if clear, this tuple variation table uses shared number data found at the start of the serialized data for this glyph variation data or ‘cvar’ table.
pub const TUPLE_INDEX_MASK: u16 = 4_095u16
pub const TUPLE_INDEX_MASK: u16 = 4_095u16
Mask for the low 12 bits to give the shared tuple records index.
pub fn bits(self) -> u16
pub fn from_bits(bits: u16) -> TupleIndex
pub fn embedded_peak_tuple(self) -> bool
pub fn embedded_peak_tuple(self) -> bool
true if the header includes an embedded peak tuple.
pub fn intermediate_region(self) -> bool
pub fn intermediate_region(self) -> bool
true if the header includes the two intermediate region tuple records.
pub fn private_point_numbers(self) -> bool
pub fn private_point_numbers(self) -> bool
true if the data for this table includes packed point number data.
pub fn tuple_records_index(self) -> Option<u16>
Trait Implementations§
§impl Clone for TupleIndex
impl Clone for TupleIndex
§fn clone(&self) -> TupleIndex
fn clone(&self) -> TupleIndex
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read more§impl Debug for TupleIndex
impl Debug for TupleIndex
§impl Default for TupleIndex
impl Default for TupleIndex
§fn default() -> TupleIndex
fn default() -> TupleIndex
§impl Hash for TupleIndex
impl Hash for TupleIndex
§impl Ord for TupleIndex
impl Ord for TupleIndex
§impl PartialEq for TupleIndex
impl PartialEq for TupleIndex
§impl PartialOrd for TupleIndex
impl PartialOrd for TupleIndex
§impl Scalar for TupleIndex
impl Scalar for TupleIndex
§fn to_raw(self) -> <TupleIndex as Scalar>::Raw
fn to_raw(self) -> <TupleIndex as Scalar>::Raw
§fn from_raw(raw: <TupleIndex as Scalar>::Raw) -> TupleIndex
fn from_raw(raw: <TupleIndex as Scalar>::Raw) -> TupleIndex
impl Copy for TupleIndex
impl Eq for TupleIndex
impl StructuralPartialEq for TupleIndex
Auto Trait Implementations§
impl Freeze for TupleIndex
impl RefUnwindSafe for TupleIndex
impl Send for TupleIndex
impl Sync for TupleIndex
impl Unpin for TupleIndex
impl UnwindSafe for TupleIndex
Blanket Implementations§
Source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
Source§fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
Source§fn adapt_into(self) -> D
fn adapt_into(self) -> D
§impl<T> AnyEq for T
impl<T> AnyEq for T
§impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
impl<T, Res> Apply<Res> for Twhere
T: ?Sized,
Source§impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
Source§fn arrays_from(colors: C) -> T
fn arrays_from(colors: C) -> T
Source§impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
Source§fn arrays_into(self) -> C
fn arrays_into(self) -> C
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
Source§type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn cam16_into_unclamped(
self,
parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>,
) -> T
fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<Q, K> Comparable<K> for Q
impl<Q, K> Comparable<K> for Q
Source§impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
Source§fn components_from(colors: C) -> T
fn components_from(colors: C) -> T
§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.§impl<T> DowncastSync for T
impl<T> DowncastSync for T
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key and return true if they are equal.§impl<T> FixedSize for Twhere
T: Scalar,
impl<T> FixedSize for Twhere
T: Scalar,
§const RAW_BYTE_LEN: usize
const RAW_BYTE_LEN: usize
Source§impl<T> FromAngle<T> for T
impl<T> FromAngle<T> for T
Source§fn from_angle(angle: T) -> T
fn from_angle(angle: T) -> T
angle.Source§impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
Source§fn from_stimulus(other: U) -> T
fn from_stimulus(other: U) -> T
other into Self, while performing the appropriate scaling,
rounding and clamping.§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
Source§fn into_angle(self) -> U
fn into_angle(self) -> U
T.§impl<State, Message> IntoBoot<State, Message> for State
impl<State, Message> IntoBoot<State, Message> for State
§fn into_boot(self) -> (State, Task<Message>)
fn into_boot(self) -> (State, Task<Message>)
Application.Source§impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
Source§type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
parameters when converting.Source§fn into_cam16_unclamped(
self,
parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>,
) -> T
fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T
self into C, using the provided parameters.Source§impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
Source§fn into_color(self) -> U
fn into_color(self) -> U
Source§impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
Source§fn into_color_unclamped(self) -> U
fn into_color_unclamped(self) -> U
Source§impl<T> IntoStimulus<T> for T
impl<T> IntoStimulus<T> for T
Source§fn into_stimulus(self) -> T
fn into_stimulus(self) -> T
self into T, while performing the appropriate scaling,
rounding and clamping.§impl<T> NoneValue for Twhere
T: Default,
impl<T> NoneValue for Twhere
T: Default,
type NoneType = T
§fn null_value() -> T
fn null_value() -> T
Source§impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
Source§type Error = <C as TryFromComponents<T>>::Error
type Error = <C as TryFromComponents<T>>::Error
try_into_colors fails to cast.Source§fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
Source§impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
Source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
OutOfBounds error is returned which contains
the unclamped color. Read more