Struct cosmic::widget::canvas::path::lyon_path::geom::euclid::Point3D

impl<T, U> Point3D<T, U>

pub fn origin() -> Point3D<T, U>
where T: Zero,

Constructor, setting all components to zero.

pub fn zero() -> Point3D<T, U>
where T: Zero,

The same as Point3D::origin.

pub const fn new(x: T, y: T, z: T) -> Point3D<T, U>

Constructor taking scalar values directly.

pub fn from_lengths( x: Length<T, U>, y: Length<T, U>, z: Length<T, U>, ) -> Point3D<T, U>

Constructor taking properly Lengths instead of scalar values.

pub fn splat(v: T) -> Point3D<T, U>
where T: Clone,

Constructor setting all components to the same value.

pub fn from_untyped(p: Point3D<T, UnknownUnit>) -> Point3D<T, U>

Tag a unitless value with units.

pub fn map<V, F>(self, f: F) -> Point3D<V, U>
where F: FnMut(T) -> V,

Apply the function f to each component of this point.

§Example

This may be used to perform unusual arithmetic which is not already offered as methods.

use euclid::default::Point3D;

let p = Point3D::<u32>::new(5, 11, 15);
assert_eq!(p.map(|coord| coord.saturating_sub(10)), Point3D::new(0, 1, 5));

pub fn zip<V, F>(self, rhs: Point3D<T, U>, f: F) -> Vector3D<V, U>
where F: FnMut(T, T) -> V,

Apply the function f to each pair of components of this point and rhs.

§Example

This may be used to perform unusual arithmetic which is not already offered as methods.

use euclid::{default::{Point3D, Vector3D}, point2};

let a: Point3D<u32> = Point3D::new(50, 200, 400);
let b: Point3D<u32> = Point3D::new(100, 100, 150);
assert_eq!(a.zip(b, u32::saturating_sub), Vector3D::new(0, 100, 250));

impl<T, U> Point3D<T, U>
where T: Copy,

pub fn to_vector(self) -> Vector3D<T, U>

Cast this point into a vector.

Equivalent to subtracting the origin to this point.

pub fn xy(self) -> Point2D<T, U>

Returns a 2d point using this point’s x and y coordinates

pub fn xz(self) -> Point2D<T, U>

Returns a 2d point using this point’s x and z coordinates

pub fn yz(self) -> Point2D<T, U>

Returns a 2d point using this point’s x and z coordinates

pub fn to_array(self) -> [T; 3]

Cast into an array with x, y and z.

§Example

enum Mm {}

let point: Point3D<_, Mm> = point3(1, -8, 0);

assert_eq!(point.to_array(), [1, -8, 0]);

pub fn to_array_4d(self) -> [T; 4]
where T: One,

pub fn to_tuple(self) -> (T, T, T)

Cast into a tuple with x, y and z.

§Example

enum Mm {}

let point: Point3D<_, Mm> = point3(1, -8, 0);

assert_eq!(point.to_tuple(), (1, -8, 0));

pub fn to_tuple_4d(self) -> (T, T, T, T)
where T: One,

pub fn to_untyped(self) -> Point3D<T, UnknownUnit>

Drop the units, preserving only the numeric value.

§Example

enum Mm {}

let point: Point3D<_, Mm> = point3(1, -8, 0);

assert_eq!(point.x, point.to_untyped().x);
assert_eq!(point.y, point.to_untyped().y);
assert_eq!(point.z, point.to_untyped().z);

pub fn cast_unit<V>(self) -> Point3D<T, V>

Cast the unit, preserving the numeric value.

§Example

enum Mm {}
enum Cm {}

let point: Point3D<_, Mm> = point3(1, -8, 0);

assert_eq!(point.x, point.cast_unit::<Cm>().x);
assert_eq!(point.y, point.cast_unit::<Cm>().y);
assert_eq!(point.z, point.cast_unit::<Cm>().z);

pub fn to_2d(self) -> Point2D<T, U>

Convert into a 2d point.

pub fn round(self) -> Point3D<T, U>
where T: Round,

Rounds each component to the nearest integer value.

This behavior is preserved for negative values (unlike the basic cast).

enum Mm {}

assert_eq!(point3::<_, Mm>(-0.1, -0.8, 0.4).round(), point3::<_, Mm>(0.0, -1.0, 0.0))

pub fn ceil(self) -> Point3D<T, U>
where T: Ceil,

Rounds each component to the smallest integer equal or greater than the original value.

This behavior is preserved for negative values (unlike the basic cast).

enum Mm {}

assert_eq!(point3::<_, Mm>(-0.1, -0.8, 0.4).ceil(), point3::<_, Mm>(0.0, 0.0, 1.0))

pub fn floor(self) -> Point3D<T, U>
where T: Floor,

Rounds each component to the biggest integer equal or lower than the original value.

This behavior is preserved for negative values (unlike the basic cast).

enum Mm {}

assert_eq!(point3::<_, Mm>(-0.1, -0.8, 0.4).floor(), point3::<_, Mm>(-1.0, -1.0, 0.0))

pub fn lerp(self, other: Point3D<T, U>, t: T) -> Point3D<T, U>
where T: One + Sub<Output = T> + Mul<Output = T> + Add<Output = T>,

Linearly interpolate between this point and another point.

§Example

use euclid::point3;
use euclid::default::Point3D;

let from: Point3D<_> = point3(0.0, 10.0, -1.0);
let to:  Point3D<_> = point3(8.0, -4.0,  0.0);

assert_eq!(from.lerp(to, -1.0), point3(-8.0,  24.0, -2.0));
assert_eq!(from.lerp(to,  0.0), point3( 0.0,  10.0, -1.0));
assert_eq!(from.lerp(to,  0.5), point3( 4.0,   3.0, -0.5));
assert_eq!(from.lerp(to,  1.0), point3( 8.0,  -4.0,  0.0));
assert_eq!(from.lerp(to,  2.0), point3(16.0, -18.0,  1.0));

pub fn clamp(self, start: Point3D<T, U>, end: Point3D<T, U>) -> Point3D<T, U>
where T: Copy,

Returns the point each component of which clamped by corresponding components of start and end.

Shortcut for self.max(start).min(end).

impl<T, U> Point3D<T, U>
where T: NumCast + Copy,

pub fn cast<NewT>(self) -> Point3D<NewT, U>
where NewT: NumCast,

Cast from one numeric representation to another, preserving the units.

When casting from floating point to integer coordinates, the decimals are truncated as one would expect from a simple cast, but this behavior does not always make sense geometrically. Consider using round(), ceil() or floor() before casting.

pub fn try_cast<NewT>(self) -> Option<Point3D<NewT, U>>
where NewT: NumCast,

Fallible cast from one numeric representation to another, preserving the units.

When casting from floating point to integer coordinates, the decimals are truncated as one would expect from a simple cast, but this behavior does not always make sense geometrically. Consider using round(), ceil() or floor() before casting.

pub fn to_f32(self) -> Point3D<f32, U>

Cast into an f32 point.

pub fn to_f64(self) -> Point3D<f64, U>

Cast into an f64 point.

pub fn to_usize(self) -> Point3D<usize, U>

Cast into an usize point, truncating decimals if any.

When casting from floating point points, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_u32(self) -> Point3D<u32, U>

Cast into an u32 point, truncating decimals if any.

When casting from floating point points, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i32(self) -> Point3D<i32, U>

Cast into an i32 point, truncating decimals if any.

When casting from floating point points, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i64(self) -> Point3D<i64, U>

Cast into an i64 point, truncating decimals if any.

When casting from floating point points, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

impl<T, U> Point3D<T, U>
where T: Float,

pub fn is_finite(self) -> bool

Returns true if all members are finite.

impl<T, U> Point3D<T, U>
where T: Copy + Add<Output = T>,

pub fn add_size(self, other: Size3D<T, U>) -> Point3D<T, U>

impl<T, U> Point3D<T, U>
where T: Real<Output = T> + Sub,

pub fn distance_to(self, other: Point3D<T, U>) -> T

impl<T, U> Point3D<T, U>
where T: Euclid,

pub fn rem_euclid(&self, other: &Size3D<T, U>) -> Point3D<T, U>

Calculates the least nonnegative remainder of self (mod other).

§Example

use euclid::point3;
use euclid::default::{Point3D, Size3D};

let p = Point3D::new(7.0, -7.0, 0.0);
let s = Size3D::new(4.0, -4.0, 12.0);
assert_eq!(p.rem_euclid(&s), point3(3.0, 1.0, 0.0));
assert_eq!((-p).rem_euclid(&s), point3(1.0, 3.0, 0.0));
assert_eq!(p.rem_euclid(&-s), point3(3.0, 1.0, 0.0));

pub fn div_euclid(&self, other: &Size3D<T, U>) -> Point3D<T, U>

Calculates Euclidean division, the matching method for rem_euclid.

§Example

use euclid::point3;
use euclid::default::{Point3D, Size3D};

let p = Point3D::new(7.0, -7.0, 0.0);
let s = Size3D::new(4.0, -4.0, 12.0);

assert_eq!(p.div_euclid(&s), point3(1.0, 2.0, 0.0));
assert_eq!((-p).div_euclid(&s), point3(-2.0, -1.0, 0.0));
assert_eq!(p.div_euclid(&-s), point3(-1.0, -2.0, 0.0));

Trait Implementations§

impl<T, U> Add<Size3D<T, U>> for Point3D<T, U>
where T: Add,

type Output = Point3D<<T as Add>::Output, U>

The resulting type after applying the + operator.

fn add( self, other: Size3D<T, U>, ) -> <Point3D<T, U> as Add<Size3D<T, U>>>::Output

Performs the + operation. Read more

impl<T, U> Add<Vector3D<T, U>> for Point3D<T, U>
where T: Add,

type Output = Point3D<<T as Add>::Output, U>

The resulting type after applying the + operator.

fn add( self, other: Vector3D<T, U>, ) -> <Point3D<T, U> as Add<Vector3D<T, U>>>::Output

Performs the + operation. Read more

impl<T, U> AddAssign<Size3D<T, U>> for Point3D<T, U>
where T: AddAssign,

fn add_assign(&mut self, other: Size3D<T, U>)

Performs the += operation. Read more

impl<T, U> AddAssign<Vector3D<T, U>> for Point3D<T, U>
where T: Copy + Add<Output = T>,

fn add_assign(&mut self, other: Vector3D<T, U>)

Performs the += operation. Read more

impl<T, U> ApproxEq<Point3D<T, U>> for Point3D<T, U>
where T: ApproxEq<T>,

fn approx_epsilon() -> Point3D<T, U>

Default epsilon value

fn approx_eq_eps(&self, other: &Point3D<T, U>, eps: &Point3D<T, U>) -> bool

Returns true if this object is approximately equal to the other one, using a provided epsilon value.

fn approx_eq(&self, other: &Self) -> bool

Returns true if this object is approximately equal to the other one, using the approx_epsilon epsilon value.

impl<T, U> Ceil for Point3D<T, U>
where T: Ceil,

fn ceil(self) -> Point3D<T, U>

See Point3D::ceil.

impl<T, U> Clone for Point3D<T, U>
where T: Clone,

fn clone(&self) -> Point3D<T, U>

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T, U> Debug for Point3D<T, U>
where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl<T, U> Default for Point3D<T, U>
where T: Default,

fn default() -> Point3D<T, U>

Returns the “default value” for a type. Read more

impl<T, U1, U2> Div<Scale<T, U1, U2>> for Point3D<T, U2>
where T: Copy + Div,

type Output = Point3D<<T as Div>::Output, U1>

The resulting type after applying the / operator.

fn div( self, scale: Scale<T, U1, U2>, ) -> <Point3D<T, U2> as Div<Scale<T, U1, U2>>>::Output

Performs the / operation. Read more

impl<T, U> Div<T> for Point3D<T, U>
where T: Copy + Div,

type Output = Point3D<<T as Div>::Output, U>

The resulting type after applying the / operator.

fn div(self, scale: T) -> <Point3D<T, U> as Div<T>>::Output

Performs the / operation. Read more

impl<T, U> DivAssign<Scale<T, U, U>> for Point3D<T, U>
where T: Copy + DivAssign,

fn div_assign(&mut self, scale: Scale<T, U, U>)

Performs the /= operation. Read more

impl<T, U> DivAssign<T> for Point3D<T, U>
where T: Copy + DivAssign,

fn div_assign(&mut self, scale: T)

Performs the /= operation. Read more

impl<T, U> Floor for Point3D<T, U>
where T: Floor,

fn floor(self) -> Point3D<T, U>

See Point3D::floor.

impl<T, U> From<[T; 3]> for Point3D<T, U>

fn from(_: [T; 3]) -> Point3D<T, U>

Converts to this type from the input type.

impl<T, U> From<(T, T, T)> for Point3D<T, U>

fn from(tuple: (T, T, T)) -> Point3D<T, U>

Converts to this type from the input type.

impl<T, U> From<Point3D<T, U>> for HomogeneousVector<T, U>
where T: One,

fn from(p: Point3D<T, U>) -> HomogeneousVector<T, U>

Converts to this type from the input type.

impl<T, U> Hash for Point3D<T, U>
where T: Hash,

fn hash<H>(&self, h: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more

1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl<T, U1, U2> Mul<Scale<T, U1, U2>> for Point3D<T, U1>
where T: Copy + Mul,

type Output = Point3D<<T as Mul>::Output, U2>

The resulting type after applying the * operator.

fn mul( self, scale: Scale<T, U1, U2>, ) -> <Point3D<T, U1> as Mul<Scale<T, U1, U2>>>::Output

Performs the * operation. Read more

impl<T, U> Mul<T> for Point3D<T, U>
where T: Copy + Mul,

type Output = Point3D<<T as Mul>::Output, U>

The resulting type after applying the * operator.

fn mul(self, scale: T) -> <Point3D<T, U> as Mul<T>>::Output

Performs the * operation. Read more

impl<T, U> MulAssign<Scale<T, U, U>> for Point3D<T, U>
where T: Copy + MulAssign,

fn mul_assign(&mut self, scale: Scale<T, U, U>)

Performs the *= operation. Read more

impl<T, U> MulAssign<T> for Point3D<T, U>
where T: Copy + MulAssign,

fn mul_assign(&mut self, scale: T)

Performs the *= operation. Read more

impl<T, U> Neg for Point3D<T, U>
where T: Neg,

type Output = Point3D<<T as Neg>::Output, U>

The resulting type after applying the - operator.

fn neg(self) -> <Point3D<T, U> as Neg>::Output

Performs the unary - operation. Read more

impl<T, U> PartialEq for Point3D<T, U>
where T: PartialEq,

fn eq(&self, other: &Point3D<T, U>) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T, U> Round for Point3D<T, U>
where T: Round,

fn round(self) -> Point3D<T, U>

See Point3D::round.

impl<T, U> Sub<Size3D<T, U>> for Point3D<T, U>
where T: Sub,

type Output = Point3D<<T as Sub>::Output, U>

The resulting type after applying the - operator.

fn sub( self, other: Size3D<T, U>, ) -> <Point3D<T, U> as Sub<Size3D<T, U>>>::Output

Performs the - operation. Read more

impl<T, U> Sub<Vector3D<T, U>> for Point3D<T, U>
where T: Sub,

type Output = Point3D<<T as Sub>::Output, U>

The resulting type after applying the - operator.

fn sub( self, other: Vector3D<T, U>, ) -> <Point3D<T, U> as Sub<Vector3D<T, U>>>::Output

Performs the - operation. Read more

impl<T, U> Sub for Point3D<T, U>
where T: Sub,

type Output = Vector3D<<T as Sub>::Output, U>

The resulting type after applying the - operator.

fn sub(self, other: Point3D<T, U>) -> <Point3D<T, U> as Sub>::Output

Performs the - operation. Read more

impl<T, U> SubAssign<Size3D<T, U>> for Point3D<T, U>
where T: SubAssign,

fn sub_assign(&mut self, other: Size3D<T, U>)

Performs the -= operation. Read more

impl<T, U> SubAssign<Vector3D<T, U>> for Point3D<T, U>
where T: Copy + Sub<Output = T>,

fn sub_assign(&mut self, other: Vector3D<T, U>)

Performs the -= operation. Read more

impl<T, U> Zero for Point3D<T, U>
where T: Zero,

fn zero() -> Point3D<T, U>

impl<T, U> Copy for Point3D<T, U>
where T: Copy,

impl<T, U> Eq for Point3D<T, U>
where T: Eq,

Auto Trait Implementations§

impl<T, U> Freeze for Point3D<T, U>
where T: Freeze,

impl<T, U> RefUnwindSafe for Point3D<T, U>
where T: RefUnwindSafe, U: RefUnwindSafe,

impl<T, U> Send for Point3D<T, U>
where T: Send, U: Send,

impl<T, U> Sync for Point3D<T, U>
where T: Sync, U: Sync,

impl<T, U> Unpin for Point3D<T, U>
where T: Unpin, U: Unpin,

impl<T, U> UnwindSafe for Point3D<T, U>
where T: UnwindSafe, U: UnwindSafe,

Blanket Implementations§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

Convert the source color to the destination color using the specified method.

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default.

impl<T> Also for T

fn also<F>(self, block: F) -> Self
where F: FnOnce(&mut Self),

Apply a function to this value and return the (possibly) modified value.

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T, Res> Apply<Res> for T
where T: ?Sized,

fn apply<F>(self, f: F) -> Res
where F: FnOnce(Self) -> Res, Self: Sized,

Apply a function which takes the parameter by value.

fn apply_ref<F>(&self, f: F) -> Res
where F: FnOnce(&Self) -> Res,

Apply a function which takes the parameter by reference.

fn apply_mut<F>(&mut self, f: F) -> Res
where F: FnOnce(&mut Self) -> Res,

Apply a function which takes the parameter by mutable reference.

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, >::Scalar>, ) -> T

Converts self into C, using the provided parameters.

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FromAngle<T> for T

fn from_angle(angle: T) -> T

Performs a conversion from angle.

impl<T, U> FromStimulus for T
where U: IntoStimulus<T>,

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> IntoAngle for T
where U: FromAngle<T>,

fn into_angle(self) -> U

Performs a conversion into T.

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, >::Scalar>, ) -> T

Converts self into C, using the provided parameters.

impl<T, U> IntoColor for T
where U: FromColor<T>,

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more

impl<T, U> IntoColorUnclamped for T
where U: FromColorUnclamped<T>,

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> IntoStimulus<T> for T

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.

impl<T> NoneValue for T
where T: Default,

type NoneType = T

fn null_value() -> T

The none-equivalent value.

impl<T> Pointable for T

const ALIGN: usize = _

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<R, P> ReadPrimitive<R> for P
where R: Read + ReadEndian, P: Default,

fn read_from_little_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_little_endian().

fn read_from_big_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_big_endian().

fn read_from_native_endian(read: &mut R) -> Result<Self, Error>

Read this value from the supplied reader. Same as ReadEndian::read_from_native_endian().

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T, U> TryIntoColor for T
where U: TryFromColor<T>,

fn try_into_color(self) -> Result<U, OutOfBounds>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more

impl<C, U> UintsFrom<C> for U
where C: IntoUints,

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.

impl<C, U> UintsInto<C> for U
where C: FromUints,

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,

impl<T> MaybeSend for T
where T: Send,

impl<T> MaybeSendSync for T