Struct rustix::net::SocketAddrV4

pub struct SocketAddrV4 { /* private fields */ }

An IPv4 socket address.

IPv4 socket addresses consist of an IPv4 address and a 16-bit port number, as stated in IETF RFC 793.

See SocketAddr for a type encompassing both IPv4 and IPv6 socket addresses.

The size of a SocketAddrV4 struct may vary depending on the target operating system. Do not assume that this type has the same memory layout as the underlying system representation.

Examples

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!("127.0.0.1:8080".parse(), Ok(socket));
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));
assert_eq!(socket.port(), 8080);

Implementations

impl SocketAddrV4

pub fn parse_ascii(b: &[u8]) -> Result<SocketAddrV4, AddrParseError>

🔬This is a nightly-only experimental API. (addr_parse_ascii)

Parse an IPv4 socket address from a slice of bytes.

#![feature(addr_parse_ascii)]

use std::net::{Ipv4Addr, SocketAddrV4};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

assert_eq!(SocketAddrV4::parse_ascii(b"127.0.0.1:8080"), Ok(socket));

impl SocketAddrV4

pub const fn new(ip: Ipv4Addr, port: u16) -> SocketAddrV4

Creates a new socket address from an IPv4 address and a port number.

Examples

use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);

pub const fn ip(&self) -> &Ipv4Addr

Returns the IP address associated with this socket address.

Examples

use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1));

pub fn set_ip(&mut self, new_ip: Ipv4Addr)

Changes the IP address associated with this socket address.

Examples

use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_ip(Ipv4Addr::new(192, 168, 0, 1));
assert_eq!(socket.ip(), &Ipv4Addr::new(192, 168, 0, 1));

pub const fn port(&self) -> u16

Returns the port number associated with this socket address.

Examples

use std::net::{SocketAddrV4, Ipv4Addr};

let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
assert_eq!(socket.port(), 8080);

pub fn set_port(&mut self, new_port: u16)

Changes the port number associated with this socket address.

Examples

use std::net::{SocketAddrV4, Ipv4Addr};

let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080);
socket.set_port(4242);
assert_eq!(socket.port(), 4242);

Trait Implementations

impl Clone for SocketAddrV4

fn clone(&self) -> SocketAddrV4

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SocketAddrV4

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for SocketAddrV4

fn deserialize<D>( deserializer: D, ) -> Result<SocketAddrV4, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for SocketAddrV4

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl From<SocketAddrV4> for SocketAddr

fn from(sock4: SocketAddrV4) -> SocketAddr

Converts a SocketAddrV4 into a SocketAddr::V4.

impl From<SocketAddrV4> for SocketAddrAny

fn from(from: SocketAddrV4) -> Self

Converts to this type from the input type.

impl FromStr for SocketAddrV4

type Err = AddrParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<SocketAddrV4, AddrParseError>

Parses a string s to return a value of this type.

impl Hash for SocketAddrV4

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for SocketAddrV4

fn cmp(&self, other: &SocketAddrV4) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for SocketAddrV4

fn eq(&self, other: &SocketAddrV4) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for SocketAddrV4

fn partial_cmp(&self, other: &SocketAddrV4) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for SocketAddrV4

fn serialize<S>( &self, serializer: S, ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl ToSocketAddrs for SocketAddrV4

type Iter = IntoIter<SocketAddr>

Returned iterator over socket addresses which this type may correspond to.

fn to_socket_addrs(&self) -> Result<IntoIter<SocketAddr>, Error>

Converts this object to an iterator of resolved SocketAddrs.

impl Copy for SocketAddrV4

impl Eq for SocketAddrV4

impl StructuralPartialEq for SocketAddrV4