wayland_protocols::wp::fifo::v1::client::wp_fifo_v1

Struct WpFifoV1

source
pub struct WpFifoV1 { /* private fields */ }
Expand description

fifo interface

A fifo object for a surface that may be used to add display refresh constraints to content updates.

This interface has no events.

Implementations§

source§

impl WpFifoV1

source

pub fn set_barrier(&self)

sets the start point for a fifo constraint

When the content update containing the “set_barrier” is applied, it sets a “fifo_barrier” condition on the surface associated with the fifo object. The condition is cleared immediately after the following latching deadline for non-tearing presentation.

The compositor may clear the condition early if it must do so to ensure client forward progress assumptions.

To wait for this condition to clear, use the “wait_barrier” request.

“set_barrier” is double-buffered state, see wl_surface.commit.

Requesting set_barrier after the fifo object’s surface is destroyed will generate a “surface_destroyed” error.

source

pub fn wait_barrier(&self)

adds a fifo constraint to a content update

Indicate that this content update is not ready while a “fifo_barrier” condition is present on the surface.

This means that when the content update containing “set_barrier” was made active at a latching deadline, it will be active for at least one refresh cycle. A content update which is allowed to tear might become active after a latching deadline if no content update became active at the deadline.

The constraint must be ignored if the surface is a subsurface in synchronized mode. If the surface is not being updated by the compositor (off-screen, occluded) the compositor may ignore the constraint. Clients must use an additional mechanism such as frame callbacks or timestamps to ensure throttling occurs under all conditions.

“wait_barrier” is double-buffered state, see wl_surface.commit.

Requesting “wait_barrier” after the fifo object’s surface is destroyed will generate a “surface_destroyed” error.

source

pub fn destroy(&self)

destroy the fifo interface

Informs the server that the client will no longer be using this protocol object.

Surface state changes previously made by this protocol are unaffected by this object’s destruction.

Trait Implementations§

source§

impl Borrow<ObjectId> for WpFifoV1

source§

fn borrow(&self) -> &ObjectId

Immutably borrows from an owned value. Read more
source§

impl Clone for WpFifoV1

source§

fn clone(&self) -> WpFifoV1

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for WpFifoV1

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Hash for WpFifoV1

source§

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl PartialEq<Weak<WpFifoV1>> for WpFifoV1

source§

fn eq(&self, other: &Weak<WpFifoV1>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialEq for WpFifoV1

source§

fn eq(&self, other: &WpFifoV1) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl Proxy for WpFifoV1

source§

type Request<'request> = Request<'request>

The request enum for this interface
source§

type Event = Event

The event enum for this interface
source§

fn interface() -> &'static Interface

The interface description
source§

fn id(&self) -> ObjectId

The ID of this object
source§

fn version(&self) -> u32

The version of this object
source§

fn data<U: Send + Sync + 'static>(&self) -> Option<&U>

Access the user-data associated with this object
source§

fn object_data(&self) -> Option<&Arc<dyn ObjectData>>

Access the raw data associated with this object. Read more
source§

fn backend(&self) -> &WeakBackend

Access the backend associated with this object
source§

fn send_request(&self, req: Self::Request<'_>) -> Result<(), InvalidId>

Send a request for this object. Read more
source§

fn send_constructor<I: Proxy>( &self, req: Self::Request<'_>, data: Arc<dyn ObjectData>, ) -> Result<I, InvalidId>

Send a request for this object that creates another object. Read more
source§

fn from_id(conn: &Connection, id: ObjectId) -> Result<Self, InvalidId>

Create an object proxy from its ID Read more
source§

fn inert(backend: WeakBackend) -> Self

Create an inert object proxy Read more
source§

fn parse_event( conn: &Connection, msg: Message<ObjectId, OwnedFd>, ) -> Result<(Self, Self::Event), DispatchError>

Parse a event for this object Read more
source§

fn write_request<'a>( &self, conn: &Connection, msg: Self::Request<'a>, ) -> Result<(Message<ObjectId, BorrowedFd<'a>>, Option<(&'static Interface, u32)>), InvalidId>

Serialize a request for this object Read more
source§

fn is_alive(&self) -> bool

Checks if the Wayland object associated with this proxy is still alive
source§

fn downgrade(&self) -> Weak<Self>

Creates a weak handle to this object Read more
source§

impl Eq for WpFifoV1

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.