#[repr(C, packed(1))]pub struct BaseGlyphPaint {
    pub glyph_id: BigEndian<GlyphId16>,
    pub paint_offset: BigEndian<Offset32>,
}Expand description
BaseGlyphPaint record
Fields§
§glyph_id: BigEndian<GlyphId16>Glyph ID of the base glyph.
paint_offset: BigEndian<Offset32>Offset to a Paint table, from the beginning of the BaseGlyphList table.
Implementations§
Source§impl BaseGlyphPaint
 
impl BaseGlyphPaint
Sourcepub fn paint_offset(&self) -> Offset32
 
pub fn paint_offset(&self) -> Offset32
Offset to a Paint table, from the beginning of the BaseGlyphList table.
Trait Implementations§
Source§impl Clone for BaseGlyphPaint
 
impl Clone for BaseGlyphPaint
Source§fn clone(&self) -> BaseGlyphPaint
 
fn clone(&self) -> BaseGlyphPaint
Returns a duplicate of the value. Read more
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
 
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from 
source. Read moreSource§impl Debug for BaseGlyphPaint
 
impl Debug for BaseGlyphPaint
Source§impl FixedSize for BaseGlyphPaint
 
impl FixedSize for BaseGlyphPaint
Source§const RAW_BYTE_LEN: usize = 6usize
 
const RAW_BYTE_LEN: usize = 6usize
The raw size of this type, in bytes. Read more
impl AnyBitPattern for BaseGlyphPaint
impl Copy for BaseGlyphPaint
Auto Trait Implementations§
impl Freeze for BaseGlyphPaint
impl RefUnwindSafe for BaseGlyphPaint
impl Send for BaseGlyphPaint
impl Sync for BaseGlyphPaint
impl Unpin for BaseGlyphPaint
impl UnwindSafe for BaseGlyphPaint
Blanket Implementations§
Source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
    T: Real + Zero + Arithmetics + Clone,
    Swp: WhitePoint<T>,
    Dwp: WhitePoint<T>,
    D: AdaptFrom<S, Swp, Dwp, T>,
 
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
    T: Real + Zero + Arithmetics + Clone,
    Swp: WhitePoint<T>,
    Dwp: WhitePoint<T>,
    D: AdaptFrom<S, Swp, Dwp, T>,
Source§fn adapt_into_using<M>(self, method: M) -> Dwhere
    M: TransformMatrix<T>,
 
fn adapt_into_using<M>(self, method: M) -> Dwhere
    M: TransformMatrix<T>,
Convert the source color to the destination color using the specified
method.
Source§fn adapt_into(self) -> D
 
fn adapt_into(self) -> D
Convert the source color to the destination color using the bradford
method by default.
Source§impl<T, Res> Apply<Res> for Twhere
    T: ?Sized,
 
impl<T, Res> Apply<Res> for Twhere
    T: ?Sized,
Source§impl<T, C> ArraysFrom<C> for Twhere
    C: IntoArrays<T>,
 
impl<T, C> ArraysFrom<C> for Twhere
    C: IntoArrays<T>,
Source§fn arrays_from(colors: C) -> T
 
fn arrays_from(colors: C) -> T
Cast a collection of colors into a collection of arrays.
Source§impl<T, C> ArraysInto<C> for Twhere
    C: FromArrays<T>,
 
impl<T, C> ArraysInto<C> for Twhere
    C: FromArrays<T>,
Source§fn arrays_into(self) -> C
 
fn arrays_into(self) -> C
Cast this collection of arrays into a collection of colors.
Source§impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
 
impl<T> BorrowMut<T> for Twhere
    T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
 
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
    T: FromCam16Unclamped<WpParam, U>,
 
impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
    T: FromCam16Unclamped<WpParam, U>,
Source§type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
 
type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
The number type that’s used in 
parameters when converting.Source§fn cam16_into_unclamped(
    self,
    parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>,
) -> T
 
fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T
Converts 
self into C, using the provided parameters.Source§impl<T> CheckedBitPattern for Twhere
    T: AnyBitPattern,
 
impl<T> CheckedBitPattern for Twhere
    T: AnyBitPattern,
Source§type Bits = T
 
type Bits = T
Self must have the same layout as the specified Bits except for
the possible invalid bit patterns being checked during
is_valid_bit_pattern.Source§fn is_valid_bit_pattern(_bits: &T) -> bool
 
fn is_valid_bit_pattern(_bits: &T) -> bool
If this function returns true, then it must be valid to reinterpret 
bits
as &Self.Source§impl<T> CloneToUninit for Twhere
    T: Clone,
 
impl<T> CloneToUninit for Twhere
    T: Clone,
Source§impl<T, C> ComponentsFrom<C> for Twhere
    C: IntoComponents<T>,
 
impl<T, C> ComponentsFrom<C> for Twhere
    C: IntoComponents<T>,
Source§fn components_from(colors: C) -> T
 
fn components_from(colors: C) -> T
Cast a collection of colors into a collection of color components.
Source§impl<T> Downcast for Twhere
    T: Any,
 
impl<T> Downcast for Twhere
    T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
 
fn into_any(self: Box<T>) -> Box<dyn Any>
Convert 
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
 
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Convert 
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
 
fn as_any(&self) -> &(dyn Any + 'static)
Convert 
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
 
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert 
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> DowncastSync for T
 
impl<T> DowncastSync for T
Source§impl<T> FromAngle<T> for T
 
impl<T> FromAngle<T> for T
Source§fn from_angle(angle: T) -> T
 
fn from_angle(angle: T) -> T
Performs a conversion from 
angle.Source§impl<T, U> FromStimulus<U> for Twhere
    U: IntoStimulus<T>,
 
impl<T, U> FromStimulus<U> for Twhere
    U: IntoStimulus<T>,
Source§fn from_stimulus(other: U) -> T
 
fn from_stimulus(other: U) -> T
Converts 
other into Self, while performing the appropriate scaling,
rounding and clamping.Source§impl<T> Instrument for T
 
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
 
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
 
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T, U> IntoAngle<U> for Twhere
    U: FromAngle<T>,
 
impl<T, U> IntoAngle<U> for Twhere
    U: FromAngle<T>,
Source§fn into_angle(self) -> U
 
fn into_angle(self) -> U
Performs a conversion into 
T.Source§impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
    T: Cam16FromUnclamped<WpParam, U>,
 
impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
    T: Cam16FromUnclamped<WpParam, U>,
Source§type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
 
type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
The number type that’s used in 
parameters when converting.Source§fn into_cam16_unclamped(
    self,
    parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>,
) -> T
 
fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T
Converts 
self into C, using the provided parameters.Source§impl<T, U> IntoColor<U> for Twhere
    U: FromColor<T>,
 
impl<T, U> IntoColor<U> for Twhere
    U: FromColor<T>,
Source§fn into_color(self) -> U
 
fn into_color(self) -> U
Convert into T with values clamped to the color defined bounds Read more
Source§impl<T, U> IntoColorUnclamped<U> for Twhere
    U: FromColorUnclamped<T>,
 
impl<T, U> IntoColorUnclamped<U> for Twhere
    U: FromColorUnclamped<T>,
Source§fn into_color_unclamped(self) -> U
 
fn into_color_unclamped(self) -> U
Convert into T. The resulting color might be invalid in its color space Read more
Source§impl<T> IntoStimulus<T> for T
 
impl<T> IntoStimulus<T> for T
Source§fn into_stimulus(self) -> T
 
fn into_stimulus(self) -> T
Converts 
self into T, while performing the appropriate scaling,
rounding and clamping.Source§impl<T, C> TryComponentsInto<C> for Twhere
    C: TryFromComponents<T>,
 
impl<T, C> TryComponentsInto<C> for Twhere
    C: TryFromComponents<T>,
Source§type Error = <C as TryFromComponents<T>>::Error
 
type Error = <C as TryFromComponents<T>>::Error
The error for when 
try_into_colors fails to cast.Source§fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
 
fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
Try to cast this collection of color components into a collection of
colors. Read more
Source§impl<T, U> TryIntoColor<U> for Twhere
    U: TryFromColor<T>,
 
impl<T, U> TryIntoColor<U> for Twhere
    U: TryFromColor<T>,
Source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
 
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
Convert into T, returning ok if the color is inside of its defined
range, otherwise an 
OutOfBounds error is returned which contains
the unclamped color. Read moreSource§impl<C, U> UintsFrom<C> for Uwhere
    C: IntoUints<U>,
 
impl<C, U> UintsFrom<C> for Uwhere
    C: IntoUints<U>,
Source§fn uints_from(colors: C) -> U
 
fn uints_from(colors: C) -> U
Cast a collection of colors into a collection of unsigned integers.
Source§impl<C, U> UintsInto<C> for Uwhere
    C: FromUints<U>,
 
impl<C, U> UintsInto<C> for Uwhere
    C: FromUints<U>,
Source§fn uints_into(self) -> C
 
fn uints_into(self) -> C
Cast this collection of unsigned integers into a collection of colors.