Struct cosmic::iced_futures::futures::io::BufWriter

source ·
pub struct BufWriter<W> { /* private fields */ }
Expand description

Wraps a writer and buffers its output.

It can be excessively inefficient to work directly with something that implements AsyncWrite. A BufWriter keeps an in-memory buffer of data and writes it to an underlying writer in large, infrequent batches.

BufWriter can improve the speed of programs that make small and repeated write calls to the same file or network socket. It does not help when writing very large amounts at once, or writing just one or a few times. It also provides no advantage when writing to a destination that is in memory, like a Vec<u8>.

When the BufWriter is dropped, the contents of its buffer will be discarded. Creating multiple instances of a BufWriter on the same stream can cause data loss. If you need to write out the contents of its buffer, you must manually call flush before the writer is dropped.

Implementations§

source§

impl<W> BufWriter<W>
where W: AsyncWrite,

source

pub fn new(inner: W) -> BufWriter<W>

Creates a new BufWriter with a default buffer capacity. The default is currently 8 KB, but may change in the future.

source

pub fn with_capacity(cap: usize, inner: W) -> BufWriter<W>

Creates a new BufWriter with the specified buffer capacity.

source§

impl<W> BufWriter<W>

source

pub fn get_ref(&self) -> &W

Acquires a reference to the underlying sink or stream that this combinator is pulling from.

source

pub fn get_mut(&mut self) -> &mut W

Acquires a mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

source

pub fn get_pin_mut(self: Pin<&mut BufWriter<W>>) -> Pin<&mut W>

Acquires a pinned mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

source

pub fn into_inner(self) -> W

Consumes this combinator, returning the underlying sink or stream.

Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.

source

pub fn buffer(&self) -> &[u8]

Returns a reference to the internally buffered data.

Trait Implementations§

source§

impl<W> AsyncBufRead for BufWriter<W>
where W: AsyncBufRead,

source§

fn poll_fill_buf( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, ) -> Poll<Result<&[u8], Error>>

Attempt to return the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
source§

fn consume(self: Pin<&mut BufWriter<W>>, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to poll_read. Read more
source§

impl<W> AsyncRead for BufWriter<W>
where W: AsyncRead,

source§

fn poll_read( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, buf: &mut [u8], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into buf. Read more
source§

fn poll_read_vectored( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, bufs: &mut [IoSliceMut<'_>], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into bufs using vectored IO operations. Read more
source§

impl<W> AsyncSeek for BufWriter<W>
where W: AsyncWrite + AsyncSeek,

source§

fn poll_seek( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, pos: SeekFrom, ) -> Poll<Result<u64, Error>>

Seek to the offset, in bytes, in the underlying writer.

Seeking always writes out the internal buffer before seeking.

source§

impl<W> AsyncWrite for BufWriter<W>
where W: AsyncWrite,

source§

fn poll_write( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from buf into the object. Read more
source§

fn poll_write_vectored( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from bufs into the object using vectored IO operations. Read more
source§

fn poll_flush( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to flush the object, ensuring that any buffered data reach their destination. Read more
source§

fn poll_close( self: Pin<&mut BufWriter<W>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to close the object. Read more
source§

impl<W> Debug for BufWriter<W>
where W: Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<'__pin, W> Unpin for BufWriter<W>
where <PinnedFieldsOfHelperStruct<__Origin<'__pin, W>> as PinnedFieldsOfHelperTrait>::Actual: Unpin,

Auto Trait Implementations§

§

impl<W> Freeze for BufWriter<W>
where W: Freeze,

§

impl<W> RefUnwindSafe for BufWriter<W>
where W: RefUnwindSafe,

§

impl<W> Send for BufWriter<W>
where W: Send,

§

impl<W> Sync for BufWriter<W>
where W: Sync,

§

impl<W> UnwindSafe for BufWriter<W>
where W: UnwindSafe,

Blanket Implementations§

source§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

source§

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

Convert the source color to the destination color using the specified method.
source§

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default.
source§

impl<T> Also for T

source§

fn also<F>(self, block: F) -> Self
where F: FnOnce(&mut Self),

Apply a function to this value and return the (possibly) modified value.
source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T, Res> Apply<Res> for T
where T: ?Sized,

source§

fn apply<F>(self, f: F) -> Res
where F: FnOnce(Self) -> Res, Self: Sized,

Apply a function which takes the parameter by value.
source§

fn apply_ref<F>(&self, f: F) -> Res
where F: FnOnce(&Self) -> Res,

Apply a function which takes the parameter by reference.
source§

fn apply_mut<F>(&mut self, f: F) -> Res
where F: FnOnce(&mut Self) -> Res,

Apply a function which takes the parameter by mutable reference.
source§

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

source§

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.
source§

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

source§

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.
source§

impl<R> AsyncBufReadExt for R
where R: AsyncBufRead + ?Sized,

source§

fn fill_buf(&mut self) -> FillBuf<'_, Self>
where Self: Unpin,

Creates a future which will wait for a non-empty buffer to be available from this I/O object or EOF to be reached. Read more
source§

fn consume_unpin(&mut self, amt: usize)
where Self: Unpin,

A convenience for calling AsyncBufRead::consume on Unpin IO types. Read more
source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8>, ) -> ReadUntil<'a, Self>
where Self: Unpin,

Creates a future which will read all the bytes associated with this I/O object into buf until the delimiter byte or EOF is reached. This method is the async equivalent to BufRead::read_until. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLine<'a, Self>
where Self: Unpin,

Creates a future which will read all the bytes associated with this I/O object into buf until a newline (the 0xA byte) or EOF is reached, This method is the async equivalent to BufRead::read_line. Read more
source§

fn lines(self) -> Lines<Self>
where Self: Sized,

Returns a stream over the lines of this reader. This method is the async equivalent to BufRead::lines. Read more
source§

impl<R> AsyncBufReadExt for R
where R: AsyncBufRead + ?Sized,

source§

fn fill_buf(&mut self) -> FillBuf<'_, Self>
where Self: Unpin,

Returns the contents of the internal buffer, filling it with more data if empty. Read more
source§

fn consume(&mut self, amt: usize)
where Self: Unpin,

Consumes amt buffered bytes. Read more
source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8>, ) -> ReadUntilFuture<'a, Self>
where Self: Unpin,

Reads all bytes and appends them into buf until the delimiter byte or EOF is found. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLineFuture<'a, Self>
where Self: Unpin,

Reads all bytes and appends them into buf until a newline (the 0xA byte) or EOF is found. Read more
source§

fn lines(self) -> Lines<Self>
where Self: Sized + Unpin,

Returns a stream over the lines of this byte stream. Read more
source§

fn split(self, byte: u8) -> Split<Self>
where Self: Sized,

Returns a stream over the contents of this reader split on the specified byte. Read more
source§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Creates an adaptor which will chain this stream with another. Read more
source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Tries to read some bytes directly into the given buf in asynchronous manner, returning a future type. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>], ) -> ReadVectored<'a, Self>
where Self: Unpin,

Creates a future which will read from the AsyncRead into bufs using vectored IO operations. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Creates a future which will read exactly enough bytes to fill buf, returning an error if end of file (EOF) is hit sooner. Read more
source§

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Creates a future which will read all the bytes from this AsyncRead. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String, ) -> ReadToString<'a, Self>
where Self: Unpin,

Creates a future which will read all the bytes from this AsyncRead. Read more
source§

fn split(self) -> (ReadHalf<Self>, WriteHalf<Self>)
where Self: Sized + AsyncWrite,

Helper method for splitting this read/write object into two halves. Read more
source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an AsyncRead adapter which will read at most limit bytes from the underlying reader. Read more
source§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadFuture<'a, Self>
where Self: Unpin,

Reads some bytes from the byte stream. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>], ) -> ReadVectoredFuture<'a, Self>
where Self: Unpin,

Like read(), except it reads into a slice of buffers. Read more
source§

fn read_to_end<'a>( &'a mut self, buf: &'a mut Vec<u8>, ) -> ReadToEndFuture<'a, Self>
where Self: Unpin,

Reads the entire contents and appends them to a Vec. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String, ) -> ReadToStringFuture<'a, Self>
where Self: Unpin,

Reads the entire contents and appends them to a String. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExactFuture<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Converts this AsyncRead into a Stream of bytes. Read more
source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where R: AsyncRead, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
source§

fn boxed_reader<'a>(self) -> Pin<Box<dyn AsyncRead + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the reader and changes its type to dyn AsyncRead + Send + 'a. Read more
source§

impl<S> AsyncSeekExt for S
where S: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> Seek<'_, Self>
where Self: Unpin,

Creates a future which will seek an IO object, and then yield the new position in the object and the object itself. Read more
source§

fn stream_position(&mut self) -> Seek<'_, Self>
where Self: Unpin,

Creates a future which will return the current seek position from the start of the stream. Read more
source§

impl<S> AsyncSeekExt for S
where S: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> SeekFuture<'_, Self>
where Self: Unpin,

Seeks to a new position in a byte stream. Read more
source§

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

source§

fn flush(&mut self) -> Flush<'_, Self>
where Self: Unpin,

Creates a future which will entirely flush this AsyncWrite. Read more
source§

fn close(&mut self) -> Close<'_, Self>
where Self: Unpin,

Creates a future which will entirely close this AsyncWrite.
source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> Write<'a, Self>
where Self: Unpin,

Creates a future which will write bytes from buf into the object. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>], ) -> WriteVectored<'a, Self>
where Self: Unpin,

Creates a future which will write bytes from bufs into the object using vectored IO operations. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAll<'a, Self>
where Self: Unpin,

Write data into this object. Read more
source§

fn into_sink<Item>(self) -> IntoSink<Self, Item>
where Item: AsRef<[u8]>, Self: Sized,

Allow using an AsyncWrite as a Sink<Item: AsRef<[u8]>>. Read more
source§

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> WriteFuture<'a, Self>
where Self: Unpin,

Writes some bytes into the byte stream. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>], ) -> WriteVectoredFuture<'a, Self>
where Self: Unpin,

Like write(), except that it writes a slice of buffers. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAllFuture<'a, Self>
where Self: Unpin,

Writes an entire buffer into the byte stream. Read more
source§

fn flush(&mut self) -> FlushFuture<'_, Self>
where Self: Unpin,

Flushes the stream to ensure that all buffered contents reach their destination. Read more
source§

fn close(&mut self) -> CloseFuture<'_, Self>
where Self: Unpin,

Closes the writer. Read more
source§

fn boxed_writer<'a>(self) -> Pin<Box<dyn AsyncWrite + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the writer and changes its type to dyn AsyncWrite + Send + 'a. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

source§

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
source§

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
source§

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

source§

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.
source§

impl<T> Downcast for T
where T: Any,

source§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
source§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
source§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
source§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
source§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

source§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromAngle<T> for T

source§

fn from_angle(angle: T) -> T

Performs a conversion from angle.
source§

impl<T, U> FromStimulus<U> for T
where U: IntoStimulus<T>,

source§

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> IntoAngle<U> for T
where U: FromAngle<T>,

source§

fn into_angle(self) -> U

Performs a conversion into T.
source§

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

source§

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
source§

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T

Converts self into C, using the provided parameters.
source§

impl<T, U> IntoColor<U> for T
where U: FromColor<T>,

source§

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more
source§

impl<T, U> IntoColorUnclamped<U> for T
where U: FromColorUnclamped<T>,

source§

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more
source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> IntoStimulus<T> for T

source§

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.
source§

impl<T> Pointable for T

source§

const ALIGN: usize = _

The alignment of pointer.
source§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
source§

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

source§

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.
source§

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T, U> TryIntoColor<U> for T
where U: TryFromColor<T>,

source§

fn try_into_color(self) -> Result<U, OutOfBounds<U>>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more
source§

impl<C, U> UintsFrom<C> for U
where C: IntoUints<U>,

source§

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.
source§

impl<C, U> UintsInto<C> for U
where C: FromUints<U>,

source§

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> ErasedDestructor for T
where T: 'static,

source§

impl<T> MaybeSend for T
where T: Send,

source§

impl<T> MaybeSendSync for T

source§

impl<T> MaybeSync for T
where T: Sync,