Struct VarcFlags Copy item path

pub const fn empty() -> VarcFlags

Returns an empty set of flags.

pub const fn all() -> VarcFlags

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<VarcFlags>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> VarcFlags

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn intersects(&self, other: VarcFlags) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: VarcFlags) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: VarcFlags)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: VarcFlags)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: VarcFlags)

Toggles the specified flags in-place.

pub const fn intersection(self, other: VarcFlags) -> VarcFlags

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: VarcFlags) -> VarcFlags

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both.

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: VarcFlags) -> VarcFlags

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

Trait Implementations§

impl Binary for VarcFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl BitAnd for VarcFlags

fn bitand(self, other: VarcFlags) -> VarcFlags

Returns the intersection between the two sets of flags.

type Output = VarcFlags

The resulting type after applying the & operator.

impl BitAndAssign for VarcFlags

fn bitand_assign(&mut self, other: VarcFlags)

Disables all flags disabled in the set.

impl BitOr for VarcFlags

fn bitor(self, other: VarcFlags) -> VarcFlags

Returns the union of the two sets of flags.

type Output = VarcFlags

The resulting type after applying the | operator.

impl BitOrAssign for VarcFlags

fn bitor_assign(&mut self, other: VarcFlags)

Adds the set of flags.

impl BitXor for VarcFlags

fn bitxor(self, other: VarcFlags) -> VarcFlags

Returns the left flags, but with all the right flags toggled.

type Output = VarcFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for VarcFlags

fn bitxor_assign(&mut self, other: VarcFlags)

Toggles the set of flags.

impl Clone for VarcFlags

fn clone(&self) -> VarcFlags

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for VarcFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl Default for VarcFlags

fn default() -> VarcFlags

Returns the “default value” for a type. Read more

impl Hash for VarcFlags

fn hash<H>(&self, state: &mut H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more

1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl LowerHex for VarcFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl Not for VarcFlags

fn not(self) -> VarcFlags

Returns the complement of this set of flags.

type Output = VarcFlags

The resulting type after applying the ! operator.

impl Octal for VarcFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl Ord for VarcFlags

fn cmp(&self, other: &VarcFlags) -> Ordering

This method returns an Ordering between self and other. Read more

1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more

1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more

1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more

impl PartialEq for VarcFlags

fn eq(&self, other: &VarcFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for VarcFlags

fn partial_cmp(&self, other: &VarcFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl Scalar for VarcFlags

type Raw = <u32 as Scalar>::Raw

The raw byte representation of this type.

fn to_raw(self) -> <VarcFlags as Scalar>::Raw

Encode this type as raw big-endian bytes

fn from_raw(raw: <VarcFlags as Scalar>::Raw) -> VarcFlags

Create an instance of this type from raw big-endian bytes

fn read(slice: &[u8]) -> Option<Self>

Attempt to read a scalar from a slice. Read more

impl Sub for VarcFlags

fn sub(self, other: VarcFlags) -> VarcFlags

Returns the set difference of the two sets of flags.

type Output = VarcFlags

The resulting type after applying the - operator.

impl SubAssign for VarcFlags

fn sub_assign(&mut self, other: VarcFlags)

Disables all flags enabled in the set.

impl UpperHex for VarcFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl Zeroable for VarcFlags

fn zeroed() -> Self

Calls zeroed. Read more

impl AnyBitPattern for VarcFlags

impl Copy for VarcFlags

impl Eq for VarcFlags

impl StructuralPartialEq for VarcFlags

Auto Trait Implementations§

impl Freeze for VarcFlags

impl RefUnwindSafe for VarcFlags

impl Send for VarcFlags

impl Sync for VarcFlags

impl Unpin for VarcFlags

impl UnwindSafe for VarcFlags

Blanket Implementations§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

Convert the source color to the destination color using the specified method.

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default.

impl<T> Also for T

fn also<F>(self, block: F) -> Self
where F: FnOnce(&mut Self),

Apply a function to this value and return the (possibly) modified value.

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> AnyEq for T
where T: Any + PartialEq,

fn equals(&self, other: &(dyn Any + 'static)) -> bool

fn as_any(&self) -> &(dyn Any + 'static)

impl<T, Res> Apply<Res> for T
where T: ?Sized,

fn apply<F>(self, f: F) -> Res
where F: FnOnce(Self) -> Res, Self: Sized,

Apply a function which takes the parameter by value.

fn apply_ref<F>(&self, f: F) -> Res
where F: FnOnce(&Self) -> Res,

Apply a function which takes the parameter by reference.

fn apply_mut<F>(&mut self, f: F) -> Res
where F: FnOnce(&mut Self) -> Res,

Apply a function which takes the parameter by mutable reference.

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, >::Scalar>, ) -> T

Converts self into C, using the provided parameters.

impl<T> CheckedBitPattern for T
where T: AnyBitPattern,

type Bits = T

Self must have the same layout as the specified Bits except for the possible invalid bit patterns being checked during is_valid_bit_pattern.

fn is_valid_bit_pattern(_bits: &T) -> bool

If this function returns true, then it must be valid to reinterpret bits as &Self.

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<T> FixedSize for T
where T: Scalar,

const RAW_BYTE_LEN: usize

The raw size of this type, in bytes. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FromAngle<T> for T

fn from_angle(angle: T) -> T

Performs a conversion from angle.

impl<T, U> FromStimulus for T
where U: IntoStimulus<T>,

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> IntoAngle for T
where U: FromAngle<T>,

fn into_angle(self) -> U

Performs a conversion into T.

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, >::Scalar>, ) -> T

Converts self into C, using the provided parameters.

impl<T, U> IntoColor for T
where U: FromColor<T>,

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more

impl<T, U> IntoColorUnclamped for T
where U: FromColorUnclamped<T>,

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more

impl<T> IntoStimulus<T> for T

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.

impl<T> NoneValue for T
where T: Default,

type NoneType = T

fn null_value() -> T

The none-equivalent value.

impl<T> NoneValue for T
where T: Default,

type NoneType = T

fn null_value() -> T

The none-equivalent value.

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T, U> TryIntoColor for T
where U: TryFromColor<T>,

fn try_into_color(self) -> Result<U, OutOfBounds>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more

impl<C, U> UintsFrom<C> for U
where C: IntoUints,

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.

impl<C, U> UintsInto<C> for U
where C: FromUints,

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,

impl<T> MaybeSend for T
where T: Send,