Struct iced_graphics::geometry::path::Builder
source · pub struct Builder { /* private fields */ }
Implementations§
source§impl Builder
impl Builder
sourcepub fn move_to(&mut self, point: Point)
pub fn move_to(&mut self, point: Point)
Moves the starting point of a new sub-path to the given Point
.
sourcepub fn line_to(&mut self, point: Point)
pub fn line_to(&mut self, point: Point)
Connects the last point in the Path
to the given Point
with a
straight line.
sourcepub fn arc_to(&mut self, a: Point, b: Point, radius: f32)
pub fn arc_to(&mut self, a: Point, b: Point, radius: f32)
Adds a circular arc to the Path
with the given control points and
radius.
This essentially draws a straight line segment from the current
position to a
, but fits a circular arc of radius
tangent to that
segment and tangent to the line between a
and b
.
With another .line_to(b)
, the result will be a path connecting the
starting point and b
with straight line segments towards a
and a
circular arc smoothing out the corner at a
.
See the HTML5 specification of arcTo
for more details and examples.
sourcepub fn ellipse(&mut self, arc: Elliptical)
pub fn ellipse(&mut self, arc: Elliptical)
Adds an ellipse to the Path
using a clockwise direction.
sourcepub fn bezier_curve_to(&mut self, control_a: Point, control_b: Point, to: Point)
pub fn bezier_curve_to(&mut self, control_a: Point, control_b: Point, to: Point)
Adds a cubic Bézier curve to the Path
given its two control points
and its end point.
sourcepub fn quadratic_curve_to(&mut self, control: Point, to: Point)
pub fn quadratic_curve_to(&mut self, control: Point, to: Point)
Adds a quadratic Bézier curve to the Path
given its control point
and its end point.
sourcepub fn rectangle(&mut self, top_left: Point, size: Size)
pub fn rectangle(&mut self, top_left: Point, size: Size)
Adds a rectangle to the Path
given its top-left corner coordinate
and its Size
.
sourcepub fn rounded_rectangle(&mut self, top_left: Point, size: Size, radius: Radius)
pub fn rounded_rectangle(&mut self, top_left: Point, size: Size, radius: Radius)
Adds a rounded rectangle to the Path
given its top-left
corner coordinate its Size
and border::Radius
.
sourcepub fn circle(&mut self, center: Point, radius: f32)
pub fn circle(&mut self, center: Point, radius: f32)
Adds a circle to the Path
given its center coordinate and its
radius.
Trait Implementations§
Auto Trait Implementations§
impl Freeze for Builder
impl RefUnwindSafe for Builder
impl Send for Builder
impl Sync for Builder
impl Unpin for Builder
impl UnwindSafe for Builder
Blanket Implementations§
source§impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for Swhere
T: Real + Zero + Arithmetics + Clone,
Swp: WhitePoint<T>,
Dwp: WhitePoint<T>,
D: AdaptFrom<S, Swp, Dwp, T>,
source§fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
fn adapt_into_using<M>(self, method: M) -> Dwhere
M: TransformMatrix<T>,
source§fn adapt_into(self) -> D
fn adapt_into(self) -> D
source§impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
impl<T, C> ArraysFrom<C> for Twhere
C: IntoArrays<T>,
source§fn arrays_from(colors: C) -> T
fn arrays_from(colors: C) -> T
source§impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
impl<T, C> ArraysInto<C> for Twhere
C: FromArrays<T>,
source§fn arrays_into(self) -> C
fn arrays_into(self) -> C
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for Uwhere
T: FromCam16Unclamped<WpParam, U>,
source§type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar
parameters
when converting.source§fn cam16_into_unclamped(
self,
parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>,
) -> T
fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar>, ) -> T
self
into C
, using the provided parameters.source§impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
impl<T, C> ComponentsFrom<C> for Twhere
C: IntoComponents<T>,
source§fn components_from(colors: C) -> T
fn components_from(colors: C) -> T
source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
.source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
.source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s.source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s.source§impl<T> DowncastSync for T
impl<T> DowncastSync for T
source§impl<T> FromAngle<T> for T
impl<T> FromAngle<T> for T
source§fn from_angle(angle: T) -> T
fn from_angle(angle: T) -> T
angle
.source§impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
impl<T, U> FromStimulus<U> for Twhere
U: IntoStimulus<T>,
source§fn from_stimulus(other: U) -> T
fn from_stimulus(other: U) -> T
other
into Self
, while performing the appropriate scaling,
rounding and clamping.source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
impl<T, U> IntoAngle<U> for Twhere
U: FromAngle<T>,
source§fn into_angle(self) -> U
fn into_angle(self) -> U
T
.source§impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for Uwhere
T: Cam16FromUnclamped<WpParam, U>,
source§type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar
parameters
when converting.source§fn into_cam16_unclamped(
self,
parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>,
) -> T
fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar>, ) -> T
self
into C
, using the provided parameters.source§impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
impl<T, U> IntoColor<U> for Twhere
U: FromColor<T>,
source§fn into_color(self) -> U
fn into_color(self) -> U
source§impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
impl<T, U> IntoColorUnclamped<U> for Twhere
U: FromColorUnclamped<T>,
source§fn into_color_unclamped(self) -> U
fn into_color_unclamped(self) -> U
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§impl<T> IntoStimulus<T> for T
impl<T> IntoStimulus<T> for T
source§fn into_stimulus(self) -> T
fn into_stimulus(self) -> T
self
into T
, while performing the appropriate scaling,
rounding and clamping.source§impl<T> Pointable for T
impl<T> Pointable for T
source§impl<R, P> ReadPrimitive<R> for P
impl<R, P> ReadPrimitive<R> for P
source§fn read_from_little_endian(read: &mut R) -> Result<Self, Error>
fn read_from_little_endian(read: &mut R) -> Result<Self, Error>
ReadEndian::read_from_little_endian()
.source§impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
impl<T, C> TryComponentsInto<C> for Twhere
C: TryFromComponents<T>,
source§type Error = <C as TryFromComponents<T>>::Error
type Error = <C as TryFromComponents<T>>::Error
try_into_colors
fails to cast.source§fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>
source§impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
impl<T, U> TryIntoColor<U> for Twhere
U: TryFromColor<T>,
source§fn try_into_color(self) -> Result<U, OutOfBounds<U>>
fn try_into_color(self) -> Result<U, OutOfBounds<U>>
OutOfBounds
error is returned which contains
the unclamped color. Read more